Odour Free Sanitiser is designed for use in food preparation areas where a high standard of hygiene is required.
May be used on all surfaces where food is prepared or stored and where a perfume free product is desirable.
Odour Free Sanitiser can be used in the following ways:
Soak cutting boards, knives, utensils
Disinfect food preparation areas
Disinfect cold rooms and storerooms
Disinfect chopping blocks
- Cleans, Disinfects, Deodorises
- Performs in hot or cold water
- Designed to handle hard water
- Concentrated - Value for money
- For Domestic or Commercial use
- Phosphate Free
- A unique blend of surfactants and germicide for optimum results
- Fragrance free - for food surface contact applications
Odour Free Sanitiser
Odour Free is a sanitiser/disinfectant designed to be used on surfaces which have already been cleaned with a detergent, or for light duty cleaning and sanitising applications.
Swab surfaces with a sponge, mop or brush. Allow contact time of 30 seconds, then rinse surface with potable water. Alternatively, use as a non-rinse disinfectant.
Food Processing: After cleaning, apply a solution of 75mL of Odour Free per 10 litres of water. Leave solution on as a non-rinse disinfectant, or sanitise by rinsing with potable water after 30 seconds contact time. Particularly suited to manual washing of implements using the two sink method, i.e. wash utensils in one sink with a detergent, then place into a second sink containing a solution of Odour Free. Rinse all and allow to air dry.
Cleaning and Sanitising: Use 100mL of Odour Free per 10 litres of water. Leave solution on as a non-rinse disinfectant, or sanitise by rinsing with potable water after 30 seconds contact time.
Light Cleaning and Sanitising: For a clean surface, use 50mL of Odour Free per 10 litres of water.
Mould: To prevent mould from returning as quickly, remove all trace of mould using a chlorinated product such as Sanitile, rinse thoroughly, then apply a solution of 50mL of Odour Free per 10 litres of water and allow to dry on the surface.
Floors: After cleaning with a detergent, use a clean mop to apply a solution of 75 mL of Odour Free to 10 litres of water.
AFTER USE, RINSE PRODUCT CONTACT SURFACES WITH POTABLE WATER.
DISINFECTANT ADVICE: Avoid mixing with other cleaning products, soaps, or chemicals - the cationic germicide can be de-activated by soaps and anionic cleansers